RAPPEL
Search
Close this search box.
Search
Close this search box.

The foil with the best ratio performance/ accessibility.

Super progressive, it is comfortable at low speeds with its thick chord and in high speeds with its high aspect ratio. Maneuvering and transitions are therefore made easier. Light wind and first take offs, dock start, wave riding, jumping… it can do it all.

Features

Chord

The thick chord profile of the Flyer foil will allow works very well at low-speed flight. It generates lift very quickly and smoothly to keep control of your foil.

Aspect ratio

A slender, “High Aspect Ratio” foil. This type of profile optimises water flow, reduces drag and brings glide to your practice. Combined with the thick chord, this configuration allows for a foil that combines performance with total accessibility.

Camber

Seen from the front, the Flyer has a neutral, flat camber to maximise the direction of lift giving the foil very high efficiency. With the absence of camber, downward facing winglets are present to increase the grip of the foil and further its great behaviour.

Made in France

Made of pre-preg carbon in France, the foil is rigid and light. With pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin during its manufacture. This guarantees a perfect ratio between epoxy and carbon, and represents the best quality process. Laser-cut, then assembled in a stack, the carbon fibres are then positioned in a mould that is mounted at high temperature and pressure, providing fantastic strength and durability.

Flyer

Span : 840 mm
Surface : 1000 cm2
Aspect Ratio : 7.1

Mast/ fuselage

The ALPHA mast offers a 13.6 cm chord length to provide stability and support.
The healthy 16 mm chord profile, provides rigidity and direct transmission of feel between you and your foil. This rigidity and feel allows  very good pumping performance. Built in our French factory in pre-preg carbon, bringing stiffness, strength and lightness with zero maintenance. The complete Flyer Foil set comes with a 71 cm fuselage. It can be dismantled and the fuselage is and mast are 100% compatible with all the foils within our ranges.

Performer

Stabiliser developed to specialise in certain wingfoil disciplines practices. SURF Performer available in 160 and 190 to bring dynamism to your Wave / downwind / freeride sessions. Performer RS available in 230 and 260 providing stability at high speeds

Tracer

Highly versatile, unsurprisingly, the Tracer stabiliser is the all-rounder of the range. It allows you to navigate in all conditions. With its lift and stability, it offers perfect control to give you total confidence in any situation.

Lightweight and without maintenance

The full carbon construction brings stiffness and lightness to the foil. In the same way, you will not be bothered with marine aggressions such as corrosion that could weaken it.

Complete foil weight (front wing, mast, fuselage, stabilizer) on average – 3 kg.

Added to cart!
  • No products in the cart.